Alsip § 6.402 Buildings & Construction Section Building and premises requirements This section establishes minimum area requirements for motel/hotel units and overall property size (12 units). It also mandates specific surfacing materials for parking and walkways, and sets parking ratios based on the number of rooms. View in Alsip’s full code →
Alsip § 6.6 Buildings & Construction Section Minimum size of dwellings This ordinance establishes a minimum livable floor area requirement of 1,200 square feet for new single-family and detached dwellings. It allows for basement area to compensate for deficiencies in the first or other floors and exempts structures existing or permitted before November 1, 1976. View in Alsip’s full code →
Antioch § 10.6.3 Zoning & Land Use Section General Standards For The R Districts This section outlines the specific minimum and maximum dimensional standards for lots and buildings within Antioch's various 'R' residential zoning districts, covering lot size, setbacks, building height, and coverage. View in Antioch’s full code →
Antioch § 10.8.2 Zoning & Land Use Section Standards For The M Districts This section outlines the minimum lot area, setbacks, height, and floor area ratio requirements for M-1, M-2, and Business Park zoning districts in Antioch. View in Antioch’s full code →
Antioch § 9.1.7 Buildings & Construction Section Minimum Floor Areas In One-Family Dwellings This section establishes minimum floor area requirements for new or structurally altered one-family dwellings in Antioch. The requirements vary based on the number of bedrooms in one-story homes and a different, higher requirement applies to two-story homes. View in Antioch’s full code →
Arlington Heights § Section 28.5 Zoning & Land Use Section Use Districts This section establishes the R-E One Family Dwelling District in Arlington Heights, specifying minimum lot sizes and widths for single-family homes, as well as for churches, convents, and monasteries. It also includes provisions for combining parcels and exceptions for pre-existing lots that do not meet current dimensional requirements. View in Arlington Heights’s full code →
Bannockburn § 260.1005 Zoning & Land Use Section Legal nonconforming lots of record This section defines a legal nonconforming lot of record and establishes conditions under which such a lot can be used for permitted uses in its zoning district. The conditions include a minimum lot area requirement and adherence to all other development standards. View in Bannockburn’s full code →
Bannockburn § 260.311 Zoning & Land Use Section Bulk, space and yard requirements This section outlines the bulk, space, and yard requirements for residential districts A and B in Bannockburn, specifying maximum building height, minimum lot area and dimensions, minimum yards, maximum gross floor area, maximum lot coverage, and minimum spacing between structures. View in Bannockburn’s full code →
Bannockburn § 260.411 Zoning & Land Use Section Bulk, space and yard requirements This section outlines the bulk, space, and yard requirements for the Retail District in Bannockburn, including maximum building height, minimum lot dimensions, yard setbacks, floor area ratio, and lot coverage. It also details exceptions and specific setback requirements. View in Bannockburn’s full code →
Bannockburn § 260.432 Zoning & Land Use Section Bulk, space and yard requirements This section establishes bulk, space, and yard requirements for the Specialty Retail District in Bannockburn, including maximum building height, minimum lot area and dimensions, minimum yard setbacks, maximum floor area ratio, and maximum lot coverage. It also outlines exceptions and references other code sections for specific situations. View in Bannockburn’s full code →
Bannockburn § 260.511 Zoning & Land Use Section Bulk, space and yard requirements This section of the Bannockburn zoning ordinance outlines the bulk, space, and yard requirements for the Office District. It details maximum building height, minimum lot area and dimensions, minimum yard setbacks, maximum floor area ratio, and maximum lot coverage. View in Bannockburn’s full code →
Bannockburn § 260.612 Zoning & Land Use Section Bulk, space and yard requirements This section establishes bulk, space, and yard requirements for the College District in Bannockburn, including maximum building height, minimum lot area, specific setback distances, and maximum coverage percentages, with exceptions noted in subsection E. View in Bannockburn’s full code →
Bannockburn § 260.709 Zoning & Land Use Section Bulk, space and yard requirements This section outlines bulk, space, and yard requirements for the Public Land and Buildings District in Bannockburn, including maximum building height, minimum lot area and dimensions, minimum yards and setbacks, and maximum floor area ratio. It also details exceptions for residential structures, accessory structures, and specific public uses like churches. View in Bannockburn’s full code →
Barrington § 3.18.3 Traffic & Vehicles Section Buildings on lots This section mandates that any buildings erected on parking lots must adhere to relevant ordinances and feature nonflammable exterior walls. It provides an exception for office-only structures, allowing them to have less than the minimum area requirements set for residential or commercial buildings. View in Barrington’s full code →
Barrington Hills § 5.3.9 Zoning & Land Use Section Bulk Regulations This section ensures ongoing compliance with bulk regulations, preventing the reallocation of required yards or open space between properties. It also mandates that any division of a zoning lot results in conforming lots and specifies how yard requirements are measured from watercourses. View in Barrington Hills’s full code →
Barrington Hills § 5.5.1 Zoning & Land Use Section Use, Lot And Bulk Regulations This section introduces the use, lot, and bulk regulations specific to residential districts in Barrington Hills. It then cross-references other chapters within the title that also apply to these districts, covering definitions, general provisions, nonconforming uses, and administration/enforcement. View in Barrington Hills’s full code →
Barrington Hills § 5.5.4 Zoning & Land Use Section Lot Area This section establishes lot area requirements for different zoning districts and outlines exceptions for lots of record, including those affected by eminent domain or conveyances under threat of eminent domain. It also addresses voluntary area increases and prohibits conversions that exacerbate lot area non-conformities. View in Barrington Hills’s full code →
Barrington Hills § 5.5.4.1 Zoning & Land Use Section Minimum Lot Area, Permitted Uses This section establishes minimum lot area requirements for specific permitted uses within the R1 to R4 residential districts in Barrington Hills. It details the acreage needed for agriculture and single-family detached dwellings based on the zoning district. View in Barrington Hills’s full code →
Barrington Hills § 5.5.4.2 Zoning & Land Use Section Minimum Lot Area, Special Uses This section outlines minimum lot area requirements for specific principal special uses within Barrington Hills' R1 to R4 residential districts. It specifies allowed uses, lot sizes, and conditions for amateur radio/television stations, artificial lakes, boathouses, and cemeteries, with other special uses listed without specific requirements. View in Barrington Hills’s full code →
Barrington Hills § 5.5.5 Zoning & Land Use Section Average Lot Width This section establishes minimum average lot width requirements for establishing uses in Barrington Hills, with specific provisions for lots recorded after certain dates and for lots of record. It also addresses situations where lot width is reduced due to eminent domain. View in Barrington Hills’s full code →
Barrington Hills § 5.5.5.1 Zoning & Land Use Section Minimum Average Lot Width, Permitted Uses This section establishes minimum average lot width requirements for principal permitted uses within the R1 to R4 residential districts in Barrington Hills. Specific lot widths are delineated for agriculture and single-family detached dwellings across these zoning districts. View in Barrington Hills’s full code →
Barrington Hills § 5.5.5.2 Zoning & Land Use Section Minimum Average Lot Width, Special Uses This section establishes minimum average lot width requirements for various special uses within the R1 to R4 residential districts in Barrington Hills. Specific requirements vary by use and district, with some uses being disallowed or left to the discretion of the zoning board of appeals. View in Barrington Hills’s full code →
Barrington Hills § 5.5.5.3 Zoning & Land Use Section Minimum Average Lot Width, Accessory Uses This section establishes minimum average lot width requirements for specific accessory uses within residential districts R1 through R4 in Barrington Hills. It defaults to principal use lot widths unless specific, higher requirements are listed for certain accessory uses like guesthouses, detached living quarters, sewage disposal units, stables, and water systems. View in Barrington Hills’s full code →
Barrington Hills § 5.5.7 Zoning & Land Use Section Interior Side Yards This section establishes regulations for interior side yards in residential districts, requiring them to be unobstructed from ground level to sky. It also specifies minimum side yard dimensions based on lot width, with special provisions for narrower lots. View in Barrington Hills’s full code →
Barrington Hills § 5.6.5 Zoning & Land Use Section Lot Area This section establishes minimum lot area requirements for business districts in Barrington Hills. For B1, B2, B3, and B4 districts, the minimum is 2,500 square feet per business structure, while the BP district requires a minimum of one acre per structure. View in Barrington Hills’s full code →
Barrington Hills § 5.7.1 Zoning & Land Use Section Use, Lot And Bulk Regulations This section establishes that specific use, lot, and bulk regulations for the Light Industrial District are detailed within this chapter. It also mandates that other chapters within the title, covering definitions, general provisions, nonconforming uses, and administration, also apply to this district. View in Barrington Hills’s full code →
Bartlett § 10.1.7 Zoning & Land Use Section Lots This section of the Bartlett Zoning Code addresses regulations concerning zoning lots, including provisions for lots of record, division of lots, and specific requirements for corner, reverse corner, and through lots regarding front yard setbacks, building orientation, and vision clearance. View in Bartlett’s full code →
Bartlett § 10.4.1 Zoning & Land Use Section Districts Established This section establishes various zoning districts within Bartlett to implement the village's comprehensive plan. It categorizes districts into Residential, Office/Commercial/Industrial, and Special Districts, each with specific designations and lot size criteria where applicable. View in Bartlett’s full code →
Bartlett § 10.4A-4 Zoning & Land Use Section Area, Bulk, Density, And Setback Requirements This section outlines the minimum and maximum requirements for area, bulk, density, and setbacks for all residential districts in Bartlett. It includes a detailed table specifying these regulations for various single-family residential districts, with exceptions noted for cul-de-sac lots and specific block face conditions. View in Bartlett’s full code →
Bartlett § 10.6A-2 Zoning & Land Use Section Use, Lot And Bulk Regulations This section outlines the specific use, lot, and bulk regulations for the B-1 Village Center District in Bartlett. It also lists other chapters within the title that apply to this district. View in Bartlett’s full code →