Alsip § 6.165 Buildings & Construction Section Height This section prohibits antenna structures from exceeding 60 feet above normal ground level in residential districts and within 300 feet of any residential district. For structures further than 300 feet, their height is determined by the village board. View in Alsip’s full code →
Alsip § 6.167 Buildings & Construction Section Air rights encroachments This section prohibits air rights encroachments from antenna structures unless the affected property owner provides written approval, which must be filed with the building commissioner. View in Alsip’s full code →
Antioch § 10.10.5 Business & Licensing Section Village Core District - Vc This section defines the Village Core (VC) district in Antioch, aiming to preserve the traditional pedestrian-oriented character of downtown shopping streets. It establishes regulations for ground-floor and upper-floor uses and sets a maximum building height of 45 feet while emphasizing context sensitivity for new development. View in Antioch’s full code →
Antioch § 10.10.7 Business & Licensing Section Main Street Transitional District - Mt This section establishes regulations for the Main Street Transitional District in Antioch, outlining permitted uses, building height limits, and placement requirements to maintain the character of the area. View in Antioch’s full code →
Antioch § 10.4.6 Zoning & Land Use Section Administrative Adjustments This section authorizes the zoning administrator to grant administrative adjustments to certain zoning ordinance standards, including maximum building height, minimum setbacks, and after-the-fact encroachments, provided specific criteria related to consistency with ordinance intent and minimal adverse impact are met. The zoning administrator cannot make adjustments for planned developments or special uses. View in Antioch’s full code →
Antioch § 10.5.2 Zoning & Land Use Section Building Height And Bulk This section of Antioch's zoning regulations establishes height limits for structures within each zoning district and outlines specific exceptions, including for certain architectural features, utility towers, and solar panels. View in Antioch’s full code →
Antioch § 10.5.3 Zoning & Land Use Section Accessory Buildings And Structures This section outlines the location, height, and bulk regulations for accessory buildings and structures in Antioch. It differentiates setback requirements based on zoning districts, particularly the Downtown Form Based District and Traditional Neighborhood Development. View in Antioch’s full code →
Antioch § 10.6.3 Zoning & Land Use Section General Standards For The R Districts This section outlines the specific minimum and maximum dimensional standards for lots and buildings within Antioch's various 'R' residential zoning districts, covering lot size, setbacks, building height, and coverage. View in Antioch’s full code →
Antioch § 10.8.2 Zoning & Land Use Section Standards For The M Districts This section outlines the minimum lot area, setbacks, height, and floor area ratio requirements for M-1, M-2, and Business Park zoning districts in Antioch. View in Antioch’s full code →
Bannockburn § 260.311 Zoning & Land Use Section Bulk, space and yard requirements This section outlines the bulk, space, and yard requirements for residential districts A and B in Bannockburn, specifying maximum building height, minimum lot area and dimensions, minimum yards, maximum gross floor area, maximum lot coverage, and minimum spacing between structures. View in Bannockburn’s full code →
Bannockburn § 260.411 Zoning & Land Use Section Bulk, space and yard requirements This section outlines the bulk, space, and yard requirements for the Retail District in Bannockburn, including maximum building height, minimum lot dimensions, yard setbacks, floor area ratio, and lot coverage. It also details exceptions and specific setback requirements. View in Bannockburn’s full code →
Bannockburn § 260.432 Zoning & Land Use Section Bulk, space and yard requirements This section establishes bulk, space, and yard requirements for the Specialty Retail District in Bannockburn, including maximum building height, minimum lot area and dimensions, minimum yard setbacks, maximum floor area ratio, and maximum lot coverage. It also outlines exceptions and references other code sections for specific situations. View in Bannockburn’s full code →
Bannockburn § 260.511 Zoning & Land Use Section Bulk, space and yard requirements This section of the Bannockburn zoning ordinance outlines the bulk, space, and yard requirements for the Office District. It details maximum building height, minimum lot area and dimensions, minimum yard setbacks, maximum floor area ratio, and maximum lot coverage. View in Bannockburn’s full code →
Bannockburn § 260.612 Zoning & Land Use Section Bulk, space and yard requirements This section establishes bulk, space, and yard requirements for the College District in Bannockburn, including maximum building height, minimum lot area, specific setback distances, and maximum coverage percentages, with exceptions noted in subsection E. View in Bannockburn’s full code →
Bannockburn § 260.709 Zoning & Land Use Section Bulk, space and yard requirements This section outlines bulk, space, and yard requirements for the Public Land and Buildings District in Bannockburn, including maximum building height, minimum lot area and dimensions, minimum yards and setbacks, and maximum floor area ratio. It also details exceptions for residential structures, accessory structures, and specific public uses like churches. View in Bannockburn’s full code →
Barrington Hills § 5.5.10 Zoning & Land Use Section Floor Area Ratio This section establishes the maximum allowable floor area for buildings on a zoning lot, calculated as a ratio of the total floor area of principal and accessory buildings to the gross lot area. View in Barrington Hills’s full code →
Barrington Hills § 5.6.8.1 Zoning & Land Use Section Bp District Bulk Requirements This section outlines the bulk requirements for the BP district, including minimum landscaped surface ratio, maximum building coverage, and maximum building height. View in Barrington Hills’s full code →
Barrington Hills § 5.7.16 Zoning & Land Use Section Regulations Along Business And Residence District Boundaries This section regulates building height and setbacks in Light Industrial Districts that abut or are across the street from business or residence districts, requiring unobstructed open space and specific setback distances based on building height to buffer adjacent districts. View in Barrington Hills’s full code →
Bartlett § 10.4A-4 Zoning & Land Use Section Area, Bulk, Density, And Setback Requirements This section outlines the minimum and maximum requirements for area, bulk, density, and setbacks for all residential districts in Bartlett. It includes a detailed table specifying these regulations for various single-family residential districts, with exceptions noted for cul-de-sac lots and specific block face conditions. View in Bartlett’s full code →
Bartlett § 10.6A-7 Zoning & Land Use Section Site And Structure Provisions This section outlines site and structure provisions for the B-1 Village Center District, detailing minimum lot area, yard requirements, building height limits, and floor area ratio. It also specifies transitional yard requirements near residential districts and a minimum size for dwelling units. View in Bartlett’s full code →
Bartlett § 10.6C-7 Zoning & Land Use Section Site And Structure Provisions This section outlines site and structure requirements for the B-3 Neighborhood Shopping District in Bartlett, specifying minimum land and lot areas, required yards, building height limits, floor area ratio, and references to other chapters for parking, loading, signs, and truck limitations. View in Bartlett’s full code →
Bartlett § 10.6D-7 Zoning & Land Use Section Site And Structure Provisions This section outlines the site and structure requirements for the B-4 Community Shopping District in Bartlett, specifying minimum land and lot areas, yard setbacks, building height limits, and floor area ratio. It also references external chapters for parking, loading, and sign requirements, and includes a specific restriction on truck parking near residential areas. View in Bartlett’s full code →
Bartlett § 10.7A-7 Zoning & Land Use Section Site And Structure Provisions This section outlines site and structure requirements for the I-1 Light Industrial District, including minimum land area, lot dimensions, required yards based on adjacent districts, and maximum building height. View in Bartlett’s full code →
Bartlett § 10.7C-7 Zoning & Land Use Section Site And Structure Provisions This section outlines site and structure regulations for properties within the I-2 Economic Development Area Overlay District in Bartlett. It specifies minimum lot area and width, required yard setbacks (with enhanced requirements adjacent to residential zones), maximum building height, and floor area ratio. View in Bartlett’s full code →
Bartlett § 10.8A-4 Zoning & Land Use Section Special Uses This section outlines special uses permitted within the P-1 Public Land District of Bartlett. It requires special use permits for listed public facilities and structures exceeding certain height or floor area ratios. View in Bartlett’s full code →
Bartlett § 10.8A-7 Zoning & Land Use Section Site And Structure Provisions This section outlines site and structure requirements for the P-1 Public Land District, including specific rules for lot area, yards, floor area ratio, building height, parking, signs, and truck parking. View in Bartlett’s full code →
Bartlett § 10.9.6 Zoning & Land Use Section Modifications This section outlines modifications allowed and prohibited for Planned Unit Developments (PUDs) regarding dimensional requirements, building height, and improvements. It specifies that while many dimensional standards can be modified, perimeter yards must meet adjacent district requirements, and certain improvements are only modifiable as per the special use ordinance. View in Bartlett’s full code →
Batavia § 9.10.2 Buildings & Construction Section Height Controlled This section prohibits the installation of television antennas that, if they fall, could contact high-tension electric wires maintained by the city or other entities. View in Batavia’s full code →
Bedford Park § 6.1.11 Zoning & Land Use Section Height And Area Exceptions And Regulations This section outlines exceptions and specific regulations for building heights and areas within Bedford Park. It details height allowances for public and institutional buildings, setbacks for accessory buildings in residential districts, and strict regulations for the height, storage, and aisle spacing of stackable containers. View in Bedford Park’s full code →
Bedford Park § 6.1.5 Zoning & Land Use Section B-1 Business District Regulations This section outlines the regulations for the B-1 Business District in Bedford Park, specifying permitted uses, building dimensions, lot coverage, and yard requirements. View in Bedford Park’s full code →